Modified atmosphere is the practice of modifying the composition of the internal atmosphere of a package (commonly food packages, drugs, etc) in order to improve the shelf life.
The modification process often tries to lower the amount of oxygen (O2), moving it from 20.9% to 0%, In order to slow down the growth of aerobic organisms and the speed of oxidation reactions. The removed oxygen can be replaced with nitrogen (N2), commonly acknowledged as an inert gas, or carbon dioxide (CO2), which can lower the pH or inhibit the growth of bacteria. Carbon monoxide can be used for keeping the red color of meat.
Re-balancing of gases inside the packaging can be achieved using active techniques such as gas flushing and compensated vacuum or passively by designing “breathable” films known as equilibrium modified atmosphere packaging (EMAP). Packets containing scavengers may be used.
Contents |
Controlled Atmosphere Storage (CAS) was used already In the 1930s when ships transporting fruits had high levels of CO2 in their holding rooms, thus increasing the shelf-life of the product. In the 1970s MA packages reached the stores when bacon and fish were sold in retail packs in Mexico. Since then the development has been stable and the interest into MAP has grown due to consumer demand. This has led to advances for example in the design and manufacturing of Bacon films. New techniques are designed, like the use of anti-fogging layer to improve product visibility. From MAP a new packaging technique − EMAP has been developed.
Under MA products like red meat, seafood, minimally processed fruits and vegetables, pasta, cheese, bakery goods, poultry, cooked and cured meats, ready meals and dried foods are packaged. The three major commodity types are fruits and vegetables, meat and meat products, and seafood. It has been estimated that 25-40% of all fresh produce harvested will not reach the consumers table, due to spoilage and mishandling that occurs during distribution.
Modified Atmosphere Packaging (MAP) is a technique used for prolonging the shelf-life period of fresh or minimally processed foods. In this preservation technique the air surrounding the food in the package is changed to another composition. This way the initial fresh state of the product may be prolonged. It is the shelf-life of perishable products like meat, fish, fruits and vegetables that will be prolonged with MAP since it slows the natural deterioration of the product. MAP is used with various types of products, where the mixture of gases In the package depends on the type of product, packaging materials and storage temperature. Meat and fish need very low gas permeability films so for non-respiring products (meat, fish, cheese etc.) high barrier films are used. The initial flushed gas-mixture will be maintained inside the MA package. But fruits and vegetables are respiring products where the interaction of the packaging material with the product is important. If the permeability (for O2 and CO2) of the packaging film is adapted to the products respiration, an equilibrium modified atmosphere will establish In the package and the shelf-life of the product will increase.
Among fresh-cut produce Equilibrium Modified Atmosphere Packaging (EMAP) is the most commonly used packaging technology. When packaging vegetables and fruits the gas atmosphere of package is not air (O2 21%; CO2 0.038%; N2 78%) but consists usually of a lowered level of O2 and a heightened level of CO2. This kind of package slows down the normal respiration of the product to prolong its shelf-life. Of course there are other factors, like the size of the product, severity of preparation, maturity of the product and type of tissue that have an effect to the shelf-life of an EMA packaged produce.
There are two techniques used in the industry to pack vegetables namely gas-flushing and compensated vacuum. In gas-flushing the package is flushed with a desired gas mixture, as in compensated vacuum the air is removed totally and the desired gas mixture then inserted. The label "packaged in a protective atmosphere" can refer to either of these; an example of a gas mixture used for non-vegetable packaged food (such as crisps) is 99.9% nitrogen gas, which is inert at the temperatures and pressures the packaging is subjected to.
The atmosphere in an MA package consists of N2, O2, CO2. It is the altered ratio of these gases that makes a difference in the prolongation of shelf life. By reducing the O2-level and increasing the CO2-level, ripening of fruits and vegetables can be delayed, respiration and ethylene production rates can be reduced, softening can be retarded and various compositional changes associated with ripening can be slowed down.
Oxygen is essential when packaging fresh fruits and vegetables as they continue to respire after harvesting. The absence of O2 can lead to Anaerobic respiration In the package which accelerates senescence and spoilage. Too high levels of O2 do not retard respiration significantly and it is around 12% of O2 where the respiration rate starts to decrease. So oxygen is used in low levels (3-5%) for positive effect. When packaging meat and fish, the high CO2-levels are effective bacterial and fungal growth inhibitors. In the case of vegetables and fruits, CO2 is not a major factor since CO2-levels above 10% are needed to suppress fungal growth significantly. Unfortunately higher levels than 10% of CO2 are working phytotoxic for fresh produce. Nitrogen is used as a filler gas since it neither encourages or discourages bacterial growth.
In recent years, there has been debate regarding the use of carbon monoxide (CO) in the packaging of red meat. While no risk was found in the use of low levels of CO, the fact that CO maintains the color of the meat and can, in that way, hide visual evidence of spoilage was raised. The European Food Information Council (EFIC) released a report in 2001 reviewing the data.
When selecting packaging films (web substrates) for EMAP of fruits and vegetables the main characteristics to consider are gas permeability, water vapour transmission rate, mechanical properties, transparency, type of package and sealing reliability. Traditionally used packaging films like LDPE (low density polyethylene), PVC (polyvinyl chloride), EVA (ethylene-vinyl acetate) and OPP (oriented polypropylene) are not permeable enough for highly respiring products like fresh-cut produces, mushrooms and broccoli. As fruits and vegetables are respiring products, there is a need to transmit gases from and to the package. Films designed with these properties are called permeable films. Other films, called barrier films, are designed to prevent the exchange of gases and are mainly used with non-respiring products like meat and fish.
EMAP films developed to control the humidity level as well as the gas composition in the sealed package are beneficial for the prolonged storage of fresh fruits, vegetables and herbs that are sensitive to moisture. These films are commonly referred to as modified atmosphere/modified humidity packaging (MA/MH)films.
Although Modified Atmosphere Packaging is a well-established process, it is a good practice to maintain tight quality assurance through package testing. Incorrect oxygen levels, empty gas cylinders and bad sealing bars can cause imprecise gas blends and poor package seals that can result in product spoilage. Routine package testing with headspace gas analysers, on-line gas analysers and leak detectors assures package quality, hence helps ensuring the shelf life.
|
|
|||||